Nucleum (& Australia expansion) insert / box organizer with individual player and experiment trays.
from $81.62
This is an insert for the board & dice game Nucleum and its expansion "Australia". Wow did this game need it too! This insert does so much more than just organize the game in storage though.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.
Primary color:
Quantity:
This is an insert for the board & dice game Nucleum and its expansion "Australia". Wow did this game need it too! This insert does so much more than just organize the game in storage though.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.
This is an insert for the board & dice game Nucleum and its expansion "Australia". Wow did this game need it too! This insert does so much more than just organize the game in storage though.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.
-Each player gets their own tray of components, no more giving out jumbled baggies of components.
-Each experiment has its own tray, making it easy to collect all components needed for each.
- There is a resource tray that can be simply plopped into play within reach of all players, you won't need to get out bowls for all of these each time you play anymore.
- This supports the expansion Australia and both of the promos, the half tile promo is segregated from the other components making it easy to play with it, or not.
- The Australia expansion can be fully or partially segregated. If you want to combine the tiles this can be done.
- The solo components are in their own tray.
- This supports sleeved or unsleeved cards.
- This can be stored either horizontally or vertically and components will not shift or lose their place.
If you have the Australia expansion, there will be significant lid lift of about 3mm or 1.25".
This was one of our more complicated designs and I am extremely pleased with how this turned out!
If you have your own 3D printer and want to print a copy of this for yourself please use this listing below:
https://www.etsy.com/listing/1599714213/stl-files-for-nucleum-and-australia
This was lovingly designed by myself and is only available where PrintablesByCaren products are sold.
If you have any questions please don't hesitate to ask.